Operating Instructions - Allen + Roth L1120H Instructions

ASSEMBLY INSTRUCTIONS
6. Peel the backing off the adhesive tape stripes on the
bottom of the wire clips (E). Attach the wire clips (E)
as needed to the wall or ceiling and press gently. Clip
the power cord to the wire clips (E). Plug the power
cord into a ground 3-prong outlet. Once you restore
power to the house, the fan is ready to use.

OPERATING INSTRUCTIONS

1. The knob on the bottom of the fan operates the fan
speed as follows: High, Medium, Low, and Off.
6
1
7
E
Knob
allenandroth.com
TM