Mescomp Technologies harma klinic AC 211 Mode D'emploi page 41

XXIX. Memory – special feature.
Average of the last 3 measures.
After each measurement, the SYS, DIA and heart pulse rate
will be automatically stored in memory together with the
time and date. Each Memory can keep records up to the
latest 30 measures. If more than 30 measures, the memory
will automatically clear out the earliest data.
a. AVERAGE of the LAST 3 MEASURES
Once you first press the MEMORY Key, the average of the last 3
measurements is displayed; the symbol [A] (Average) is shown
to remind you that this is the average of the last 3 measures.
This feature is interesting as, for example, by taking your
blood pressure every morning in the same condition, you can
evaluate more precisely your usual blood pressure level.
b. MEMORY
Press the "MEMORY" Key to recall the past measurements
in memory. The first information displayed is the Average
of the past 3 measurements (see above); Press again
"MEMORY" Key to see the last measurement results in
memory, and so on. Each measurement in memory is
identified with a number from 1 to 30, the time and the date.
Press the ''START/STOP'' key to stop reading the
measurements in memory.
Please note that the Irregular heart beat symbol is NOT
stored into memory.
c. EARASING RECORDS in MEMORY
(a) Press the ''▲'' or ''▼'' key to select user 1, 2 or 3.
(b) Press the "MEMORY" Key.
(c) HOLD the "MODE" key and the ''▲'' simultaneously to
erase all information in Memory for the selected user.
You should see the letter 'CLA' on the screen during
the process.
39