Mescomp Technologies harma klinic AC 211 Mode D'emploi page 39

c. Press the "START" key to switch on the unit; Select
the User 1, 2 or 3 as described in above paragraph 4
above.
d. Then, Press again "START/STOP" key to START the
measurement. All the segment of the screen will appear
and then the air pressure will automatically pump up to
160 mmHg. If your blood pressure tends to be on the
higher level, the air pressure will automatically increase
to the required level for measurement. DO NOT MOVE
OR TALK DURING THE MEASUREMENT.
e. After the air pressure has increased, it will slowly
decrease. When the pulse rate is detected, the HEART
rate symbol will start flashing; the measurement is
processing.
f. At the end of the measure, the SYS, DIA, Heart pulse
rate will be displayed for one minute. You may see
the Irregular heart beat symbol (see related section
Irregular heart beat for more information)
6. To change batteries:
When "
weak. Take out all four batteries and put in 4 pcs of new
Alkaline batteries. All batteries used must be the same
type. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (cadmium) batteries. Do not mix old and
new batteries.
XXVII. How to measure
" show up on the display, the battery is
37