Mescomp Technologies harma klinic AC 211 Mode D'emploi page 38

e. Press the "MODE" key to confirm setting and go to the
setting of the DIASTOLIC.
f. The DIASTOLIC figure is now the flashing on the lower
part of the screen (85); Press the selection key ''▲'' or ''
▼'' on the side of the unit to adjust up or down this figure
(Please note that the adjustment is done by +/-5 mmHg
each time you press the ''▲'' or ''▼'' key).
g. Press the "MODE" key to confirm and complete the
setting of your Blood pressure monitor. The screen now
display the time and date and the current user number.
4. Multiple User Mode
Your blood pressure monitor can keep the records of up to
3 different users in separate memory. This is very useful if
several members in your family are using your blood pressure
monitor. For instance, you may keep all your records in the
memory of USER 1, and the all the records of your wife in the
USER 2. You may also set different settings for the SYS and
DIA as explained in previous paragraph 3 above.
When you first start the unit, default user is USER 1; to
select another user, simply press the ''▲'' or ''▼'' on the
side of the unit to select user 2 or 3. Then, Press the
''START/STOP'' key to start the measurement of your blood
pressure.
5. Steps to take your Blood pressure measurement
a. Wrap the cuff around the arm(refer to attaching pressure
cuff in section XXV)
b. Sit upright on the chair too have correct posture (refer to
correct posture in Taking Blood Pressure in section XXV)
XXVII. How to measure
36