Mescomp Technologies harma klinic AC 211 Mode D'emploi page 35

1. Inserting 4 pieces "AA" Alkaline batteries in position:
a. Open battery cover
b. Refer to the picture in positioning
batteries
c. All segments will appear on the
display in 3 seconds.
d. Display 1 month 1 date, 12 hour
0 minute.
2.Setting Month, Date and Time :
a. Press "MODE" button
( " month " starts flashing.)
Press ''▲'' or ''▼'' button to set the correct month (1,2,3, ..12)
b. Press "MODE" button again ( " date " starts flashing )
Press ''▲'' or ''▼'' button to set the correct date
c. Press "MODE" button again ( " hour " starts flashing )
Press ''▲'' or ''▼'' button to set the correct hour in
12-hour format.
d. Press "MODE" button again ( " minute " starts flashing )
Press ''▲'' or ''▼'' button to set the correct minute
(0,1,2,3, .59)
e. Press "MODE" button again 3 times in a roll to switch to
normal time.
f. Device is ready to start.
3. Setting the SYS and DIA of your BPM – COLOR
CHECK feature
The factory setting for your BPM is for USER 1, as follow:
SYSTOLIC (SYS): 130 mmHg
DIASTOLIC (DIA): 90 mmHg
XXVII. How to measure
33
P
mmHg
ERROR