Additional Depth Adjustments For The Laterals; Angle Ajustment Of The Laterals; Optional Hp2 Back Swing-Away Lateral - Physipro HP2 Mode D'emploi

ENGLISH

7.4 Additional Depth Adjustments for the Laterals

1.
Loosen screws A and B on the outside of the lateral.
2.
Slide the lateral plate using the horizontal groove of the
anchor.
3.
Tighten screws A and B.

7.5 Angle Ajustment of the Laterals

1. Loosen screws A and B behind the HP2 back.
2.
Pivot the lateral until you reach the desired angle.
3.
Tighten screws A and B.

7.6 Optional HP2 back Swing-Away lateral

The swing-away laterals are adjusted exactly the same way.
To push them out, just push the central part A of the mechanism upwards and push the
lateral out.
A
20
HP2 Back
A
B
A
B