Laterals; Laterals Installation - Physipro HP2 Mode D'emploi

Owners manual
1. Utilise
2. Dé
3. Re
4.
Be aware of the plate position and temporarily fasten it on both sides.
Tighten Slightly
5.
Insert the backrest with the anchor support system in the anchor slide (see
section 5.3)
6.
When everything is in place and well adjusted, tighten all the bolts, but don't
overtighten the screw and the bolt holding the U-bolt.

7. Laterals

(optional, except for the HP2 sport back)

7.1 Laterals Installation

1.
Slide the bolts A in the support as shown here and insert
the washers B between the bolts and the back.
2. Put the nuts C in place.
3.
Do not tighten the bolts right away, you need to be able to
adjust the height and the depth of the laterals.
A
15
ENGLISH
B
C
Revision 5
September 2015