Contour Laterals Installation Instructions; Adjustment Of The Laterals - Physipro HP2 Mode D'emploi

Owners manual

7.7 Contour Laterals Installation Instructions

1. Slide the bolts A in the support as shown here and
insert the washers B between the bolts and the
back.
2. Position the nuts C in place.
3. Do not tighten the bolts right away, you need
to be able to adjust the height and the depth
of the laterals.

7.8 Adjustment of the Laterals

Follow the steps below to adjust the height:
1. Loosen screws A on the outside of the laterals.
Slide up and down the lateral using the groove of the plate.
2.
3. Tighten screws A.
A
Width Between the Laterals
Back
21
Laterals
to
to
to
ENGLISH
C
A
B
Revision 5
September 2015