Safety Symbols
The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all
instructions on the machine before attempting to assemble and operate.
Symbols
READ THE OPERATOR'S
MANUAL(S) – Read, understand,
and follow all instructions in the
user manual(s) before attempting
to assemble and operate.
SAFETY ALERT – Indicates
a precaution, a warning or
a danger.
Wear personal protective
equipment, including
close-fitting clothing.
CAUTION! Avoid contacting the
guide bar tip with any object. Tip
contact may cause the guide bar
to move suddenly upward and
backwards, which may cause
serious injury to the user.
DANGER! ROTATING
BLADES – Keep hands and
feet away from openings while the
saw is running.
SWITCH OFF! Remove plug from
outlet before cleaning or conducting
maintenance checks.
The rotating part will continuously
run for several seconds after you
turn off the machine.
Descriptions
Symbols
Keep bystanders and children
a safe distance away.
WARNING! Do not expose the unit
to rain or wet conditions.
WEAR EYE AND HEARING
PROTECTION – For protection
against injury, wear ear defenders and
safety goggles.
50 ft
WARNING! SHOCK HAZARD –
(15 m)
Keep at least 50 ft (15 m) away
from power lines. Do not overreach.
Keep proper footing and balance at
all times.
Wear protective gloves and non-
slip footwear when using the
machine and handling debris.
SWITCH OFF! Remove plug from
outlet immediately if the cord is
damaged or cut.
Double Insulation.
4
Descriptions