Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
J
SETUP
SETUP
SETUP
J
Digital sources
Digital Sources
Decoder/Descrambler
(Picture tilt)
Information line
Factory settings
Auto format
INSTALLATION
Decoder/Descrambler
J
Programme
Programme
Decoder status
Install TV Setup
The Setup menu allows you to adjust initial settings, i.e. those which are not
related to the installation of the TV channels.
The Setup menu contains items that control the settings of the TV's functions,
features, services and peripherals you may have connected.
&
Use the cursor in the up/down, left/right directions to select the menu item.
é
Use the OK key in the centre of the cursor to activate.
"
Use the Ï key to return or switch menu off.
Digital sources
See Connect Peripheral Equipment, p. 21 to connect your digital equipment,
like a DVD, a digital satellite tuner or a similar digital device.
yes/no
Define Decoder/Descrambler programme numbers
If a decoder or a descrambler is connected, see p. 20, you can define one or
more programme numbers as decoder programme numbers.
Press the cursor left/right to select the input used to connect to your
decoder
Select
activated as a decoder programme number.
Select
EXT2
When selecting the decoder, the message EasyLink: downloading presets....
appears on the screen.
Picture tilt
Select Picture tilt with the cursor up/down.
Keep the cursor left/right pressed to adjust the rotation of the picture.
Information line
Select
i key on the remote control, a TV channel which broadcasts teletext may
transmit the name of the TV channel, the programme name or another
message.This is displayed on screen next to information about sound and
picture format.
When selected
after the selection of a TV channel or after pressing the i key.
Factory settings
Select
restore picture and sound settings, predefined in the factory.
Auto format
Selecting
possible when TV programmes are not carrying special signals detecting the
correct screen format.
With the q key on the remote control you can still select other picture
formats. See p. 10.
Installation
Select
return immediately to the
'
To exit from the menu press the Ï key repeatedly.
,
or
.
Off
EXT1
EXT2
if you do not want the selected programme number being
Off
when the decoder is connected to your EasyLink video recorder.
(if provided)
and after the selection of a TV programme or after pressing the
On
, only sound and picture format information is displayed
Off
and press the OK key in the centre of the cursor to
Factory settings
causes the screen to automatically fill as much of the picture as
Yes
and press the OK key in the centre of the cursor to
Installation
INSTALLATION
menu.
Installation
7
Publicité
