Troubleshooting; Frequently Asked Questions - Locinox SlimStone Manuel

10. TROUBLESHOOTING

PROBLEM
• All lights are flashing.
• The SlimStone lighting is off after pushing a
button.
• The SlimStone does not react after entering
the code.
• The sequence light remains lit.
• The lights flash after entering the PIN code
and confirmation by pressing

11. FREQUENTLY ASKED QUESTIONS

QUESTION
• Is the keypad heated?
• How weatherproof is the SlimStone?
• Can I use the SlimStone with sectional doors?
A discarded device can either be returned to your dealer or be sent back to Locinox.
This product's recycling fee is € 0,2.
The WEE marking on the product indicates that it may not be thrown away together with
normal household waste and must be handed over to a designated collection point for
the recycling of electrical and electronic rejects.
As manufacturer of this product, we guarantee that we have taken all the necessary steps
in order to comply with the current safety requirements for this product.
SlimStone
• When wrong codes have been entered
repeatedly, the SlimStone is blocked.
See 5.2.
• Verify the power supply connection.
• Entering a code must always be confirmed
with
• Check if the cables of the override button are
insulated.
• Possibly you set a time of 99 seconds.
• The entered code does not match any of the
registered codes. See 5.2.
# .
• Yes, SlimStone has a regulated heating
system which keeps the keys frost-free.
• SlimStone is designed to comply with the
IP68 standard.
• Yes, by setting the relay hold time to 0, a
pulse is given with which sectional doors can
be controlled.
SOLUTION
# .
ANSWER
EN
13