Publicité
Les langues disponibles
Les langues disponibles
Dispenser Removal
1. These instructions are for
converting an existing stainless
steel folded towel dispenser
with a trash can unit to a
recessed hard roll towel
dispensing system.
2. Locate the key and open
the door to the folded towel
dispenser.
3. Now open the trash can lock
and remove the trash can part
of the installed wall unit. Set it
aside as it will be used again.
4. Determine how the system is
installed in the current location.
Determine where the screws
are located and ensure that the
system is properly secured.
5. Note that trash can system
needs to be securely installed.
Use 2.5 inch screws to tighten
the install if needed to provide a
secure install.
6. With the door closed and
locked to the towel dispenser,
take the pry tool and insert in
between the back recessed
housing and the door as
shown.
7. With a hammer pound the pry
tool down the side of the towel
dispenser.
8. When this process is completed
unlock, open the door and
inspect. This process will have
loosened the hinge system of
the folded towel dispenser.
1.
3.
5.
2.5"
2,5"
7.
2.
4.
6.
8.
Publicité
