Table des Matières
Publicité
INSTALLATION Continued
9. Level the oven using a 1" wrench and adjust the feet or
the casters.
NOTE: Ovens supplied with casters must be installed with an
approved restraining device
Assembly Instructions For
Double Deck Casters
Verify all parts are present before beginning assembly.
Parts List
ITEM
QTY
1
4
Caster Pads Assembly
2
2
Heavy Duty Caster W/O Brake
3
2
Heavy Duty Caster W/Brake
1
Bag Of Hardware
8
3/8"-16" x 3/4" Bolts
8
3/8" Flat Washer
8
1/4" Hex Type B Sheet Metal Screws
8
Split Ring Lock Washers
Tools required for assembly
1. 9/16" wrench
2. 3/8" wrench
3. 1" wrench
Page 8
DESCRIPTION
Assembly
1. Raise the unit or lay it on its left side.
2. Attach each caster pad (1) with two 3/8" bolts and flat
washers and two 1/4" hex type "B" sheet metal screws and
lock washers.
3. Screw the heavy duty casters with brakes (2) into the
front caster pads and the heavy duty casters without
brakes (3) into the rear caste pads.
4. Make sure all bolts and screws are tight.
5. Stand the unit up.
6. Move the unit to its desired location.
7. Level the oven using a 1" wrench to adjust the casters.
1
2
1
1
1
2
Part # 4520415 (07/12/11)
3
3
Publicité
Table des Matières
