Table des Matières
Publicité
INSTALLATION Continued
Installation Of Legs, Stand
Verify that all parts are present before beginning assembly.
Tools required for Assembly
1. 9/16" Wrench
2. 3/8" Wrench
3. 1" Wrench
4. Phillips Head Screw Driver
5. Hammer (Foot Version Only)
1
Page 6
Diagram of unit shown on left side
1
1
1
2
5
5
4
Assembly Instructions For Open Base
1. Raise the unit or lay it on its left side.
2. For foot versions take a hammer and lightly tap a square
foot insert (2) into each leg.
3. For caster versions attach a caster pad assembly (5) to the
bottom of each leg. Position caster pad (5) and drill four
11/64 diameter holes in the leg and fasten the caster pad
to the leg with #10 Phillips head sheet metal screws.
4. For caster versions screw the heavy duty caster with
brakes (4) into the front legs and the heavy duty casters
without brakes (3) into the rear legs.
5
3
2
5
2 2
3
4
6
9
9
10 10
7
10
7
10
6
9
9
Part # 4520415 (07/12/11)
REF
Publicité
Table des Matières
