Publicité
Les langues disponibles
Les langues disponibles
General recommendations
Never use scouring pads, steel wool,
Z
X
muriatic acid or other products which
could scratch or mark the surface.
Foods that accidentally fall or settle
Z
X
on the surface, on the functional or
aesthetic elements of the hob must
not be eaten.
Cleaning the appliance
Clean the appliance after every use
Z
X
in order to prevent food residues
from burning on.
To clean everyday dirt, use a soft
Z
X
cloth or sponge with water and a
suitable cleaning agent. Follow the
manufacturer's advice with regard
TROUBLESHOOTING
Error codes
Error code
Description
ER 03 and
Continuous sensor
continuous
activation; TC turn
tone
off after 10 sec
ER 20
Flash memory – TC
error
ER 22
Button evaluation
defective,
UI shuts off after
3.5-7.5 sec
to cleaning agents. We recommend
using protective cleaning agents.
Remove encrusted dirt, e.g. from
Z
X
milk that has boiled over, with a
glass ceramic hob scraper while the
hob is still warm. Please follow the
manufacturer's advice with regard to
the scraper.
Remove sugary foods, such as mar-
Z
X
malade, that have boiled over with a
glass ceramic hob scraper while the
hob is still warm. Otherwise, this could
damage the glass ceramic surface.
Remove melted plastic with a glass
Z
X
ceramic hob scraper while the hob
is still warm. Otherwise, this could
damage the glass ceramic surface.
Remove limescale stains using a
Z
X
small amount of lime-dissolving
solution, e.g. vinegar or lemon juice,
when the hob has cooled down. Then
clean again with a damp cloth.
Possible cause of error
Water or cookware on
the glass over the touch
control sensors
µC-defective
Short or open circuit in
the area of the button
sensoric
Remedy
Clean the control
surface, remove
objects on the sensors.
Replace TC
Replace TC
EN
37
Publicité
