Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Protective equipment
General
Do not use the machine unless you are able to call for
help in the event of an accident.
Personal protective equipment
You must use approved personal protective equipment
whenever you use the machine. Personal protective
equipment cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident does happen.
Ask your dealer for help in choosing the right equipment.
WARNING! The use of products such as
!
cutters, grinders, drills, saws that sand
or form material can generate dust and
vapors which may contain hazardous
chemicals. Check the nature of the
material you intend to process and use
an appropriate breathing mask.
Long-term exposure to noise can result
in permanent hearing impairment.
Always use approved hearing protection.
Listen out for warning signals or shouts
when you are wearing hearing
protection. Always remove your hearing
protection as soon as the motor stops.
Always wear:
•
Approved protecting helmet.
•
Hearing protection.
•
Approved eye protection. If you use a face shield then
you must also wear approved protective goggles.
Approved protective goggles must comply with
standard ANSI Z87.1 in the USA or EN 166 in EU
countries. Visors must comply with standard EN 1731.
•
Approved respiratory protection.
•
Protective gloves.
•
Heavy-duty, firm grip gloves.
•
Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement. Cutting generates
sparks that can ignite clothing. Husqvarna
recommends that you wear flame-retardant cotton or
heavy denim. Do not wear clothing made of material
such as nylon, polyester or rayon. If ignited such
material can melt and cling to the skin. Do not wear
shorts
•
Boots with steel toe-caps and non-slip sole
OPERATING
Other protective equipment
!
•
Fire Extinguisher
•
First aid kit
General safety warnings
This section describes basic safety directions for using
the machine. This information is never a substitute for
professional skills and experience. If you get into a
situation where you feel unsafe, stop and seek expert
advice. Contact your dealer, service agent or an
experienced user. Do not attempt any task that you feel
unsure of!
•
Please read the operator's manual carefully and make
sure you understand the instructions before using the
machine. It is recommended that first time operators
also obtain practical instruction before using the
machine.
•
Keep in mind that it is you, the operator that is
responsible for not exposing people or their property
to accidents or hazards.
•
The machine must be kept clean. Signs and stickers
must be fully legible.
!
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
•
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
•
Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
•
Do not use the machine in bad weather, such as
dense fog, rain, strong wind, intense cold, etc.
Working in bad weather is tiring and can lead to
dangerous conditions, e.g. slippery surfaces.
•
Never start to work with the machine before the
working area is clear and you have a firm foothold.
Look out for any obstacles with unexpected
CAUTION! Sparks may appear and start a
fire when you work with the machine.
Always keep fire fighting equipment
handy.
WARNING! Read all safety warnings and
all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
English - 11
Publicité
Chapitres
Table des Matières
