Lelit PL042EMI Mode D'emploi page 7

29. Press the on/off switch (11): the indicator light: machine on (14) and the indicator light: steam/coffee
ready (3) will come on. Do this operation only if the machine is off. If it's on pass to the following point.
30. As soon as the indicator light: steam/coffee ready (3) goes off, the machine is ready for use.
31. Fit the pod filter (18) into the filter holder (8) that has been warmed up by leaving it attached to the
brewing group as described in point 7.
32. Open the single packed pod not damaging the pod.
33. Place the pod in its filter (18).
34. Insert the filter holder (8) in the brewing group ring (5), turn it from left to right with force, then put the
cup on the removable water drainage tray (7).
35. Push the coffee/hot water switch (13).
36. Once you get the coffee desired quantity, push the coffee/hot water switch (13) again.
37. Remove the filter holder (8) and throw away the used pod.
Steam:
38. Check that the water tank (1) has been filled in with water.
39. Press the on/off switch (11): the indicator light: machine on (14) and the indicator light: steam/coffee
ready (3) will come on. Do this operation only if the machine is off. If it's on pass to the following point.
40. Press the steam switch (12).
41. As soon as the light: steam/coffee ready (3) goes off, the machine is ready for use.
42. Open the steam/hot water knob (4). First some water will flow out and then the steam.
43. Put the cup with the desired infusion under the steam tube (6) and turn the knob completely.
44. When the drink has been suitably frothed, close the steam/hot water knob (4) and press the steam switch
(12) again.
45. Reopen the steam/hot water knob (4) and repress the steam switch (12) and the coffee/hot water switch
(13) again. When the water flows out of the steam tube (6), close the steam/hot water knob (4) again and
at the same time press the coffee/hot water switch (13) and the steam switch (12) again. Clean carefully
the steam/hot water tube (6).
Hot water:
46. Check that the water tank (1) has been filled in with water.
47. Press the on/off switch (11): the indicator light: machine on (14) and the indicator light: steam/coffee
ready (3) will come on. Do this operation only if the machine is off. If it's on pass to the following point.
48. As soon as the light: steam/coffee ready (3) goes off, the machine is ready for use.
49. Open the steam/hot water knob (4).
50. Press the steam switch (12) and the hot coffee/hot water switch (13). Hot water will flow out from the
steam tube (6) immediately.
51. Once you have got the desired quantity of water, repress the steam switch (12) and the coffee/hot water
switch (13) again and close the steam/water knob (4).
52. After obtaining hot water from the tube, make sure that there is still water in the tank (1).
Useful Tips:
The strainers (9 and 10) do not need to be washed after every single use but we suggest checking that
−
the holes are not obstructed.
For a better result, we suggest keeping the cups warm on the cup-warmer (2) which only operates by
−
machine on.
Routine maintenance and precautions:
It is recommended to clean, after each use, the steam tube and the strainer holder carefully
−
For cleaning it is recommended the use of a wet damp cloth
−
Do not leave the machine outdoor. And do not immerse the machine in water.
−
The machine can be used only by adults and must be kept away from children
−
Do not wash strainer and strainer holder in dishwasher.
−
TECHNICAL DATA:
Voltage: 230 V - 50 Hz; 120 V – 60 Hz
Power: 1200 W
Heating time: ca. 3 min.
Pump pressure: 15 bar
Weight: 12.2 kg
Dimensions (HxLxD): 39*33*42 cm
To be operated with ground coffee and coffee pods
English
Pag. 7