Télécharger Imprimer la page

CAPTELEC 48949 Manuel page 10

Pyrograveur & fer a souder 2 en 1

Publicité

Les langues disponibles

Les langues disponibles

F 2017 /
XXX
6. Unplug from the power outlet after use and allow the appliance to cool down completely before to clean it or to
move it.
7. When disconnecting the cable, always pull at the plug; do not pull on the cable itself.
8. When using the device, always pull the power cord completely from its housing to prevent overheating.
9. If the cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in
order to avoid an electric shock.
10. Never try to repair it by yourself. It must be repaired by the manufacturer or its service agent or a similarly qualified
person in order to avoid an electric shock.
11. The power cable must be checked regularly to avoid damage. If the power cable is damaged it must be replaced by
a qualified service center to avoid any danger.
12. Always place your device on a dry surface.
13. Do not use outdoors.
14. Do not let the power cord on the edge of a table or work surface, and prevent it comes into contact with hot surfaces.
15. Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.
16. Do not touch the hot surface. Keep the appliance out of reach of children.
17. The unit must be cleaned regularly to avoid the risk of fire.
18. Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
19. This unit is not designed to be operated by means of an external timer or a separate remote control system.
20. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capacities, or by persons lacking in experience or knowledge, unless they are supervised or instructed on the use of
this apparatus by a person responsible for their safety.Children should be supervised to ensure they do not play with
this appliance.
21. Children should be supervised to ensure that they do not play with the device.
22. Unplug it from the outlet when not in use or when you want to assemble or disassemble it, and allow it to cool
completely before handling.
23. Always place the appliance in its stand when it is on to avoid accidentally burning a surface or starting a fire.
24. Make sure the cord does not touch hot parts of the appliance.
25. Do not use the appliance near a bathtub, shower, washbasin or swimming pool. If, despite all the precautions taken,
the device should fall into the water, it is essential to unplug it before removing it.
26. Switch off and unplug the appliance after each use.
27. Always unplug and allow appliance to cool before cleaning.
28. Keep the product away from extreme temperatures, direct sunlight, strong shakes, high humidity, water, flammable
gases, vapors and solvents. • Do not expose the product to mechanical stress!Do not use the product on human
beings or animals.
29.
the product by its handle only.
30.
31. Always work in well-ventilated areas, since potential vapors could irritate or damage your eyes and airways.
32. Keep sufficient distance to burning materials such as paper, curtains, etc.
33. Sharp and pointed objects and tools can cause injuries!
34. Never leave the product unattended while connected to the mains.
35. Do not let the product cool down unattended. This poses a fire hazard!
36. Wait until the product has cooled down completely before storing it away in the storage case.
37. Make sure the product cannot fall down. There is a risk of injury and fire. Always put the product on the stand when
not in use.
38. Do not use on materials with painted surfaces.
B. HOW TO USE IT
- • The front part of the product becomes very hot during use and can cause serious burns. Hold
Poisonous vapors can be generated when melting materials. Keep sufficient distance.

Publicité

loading

Produits Connexes pour CAPTELEC 48949