Computer Requirements; Installation Procedure - Brother Pro PR-1000 Guide D'installation

Computer Requirements

Before starting the Certification Key Issuing Wizard,
check that the computer to be connected meets the
following operating conditions.
Computer IBM-PC or compatible computer
Operating System Windows XP, Windows Vista
and Windows 7
CD-ROM drive Required for installation
Others Internet connection available
and one available USB port
(required to upgrade the
embroidery machine) when
using computer
* "IBM" is a registered trademark of IBM Corporation in the United
States and other countries.
* "Windows XP", "Windows Vista", and "Windows 7", are registered
trademarks of Microsoft Corporation in the United States and other
countries.
* Each company whose software title is mentioned in this guide has a
Software License Agreement specific to its proprietary programs.
All other brands and product names mentioned in this guide are
registered trademarks of their respective companies. However, the
explanations for markings such as
clearly within the text.
All manuals and user guides at all-guides.com
®
and ™ are not exhibited

Installation Procedure

The following procedure describes how to upgrade
your embroidery machine to KIT I .
Note
• If the procedure described below is not fully
completed, your embroidery machine cannot be
I
upgraded to KIT .
• Access to the Internet is required in order to obtain a
Certification Key.
a
Make a note of the 10-digit number (internal
machine identification number) displayed
beside "No." on page 5 or 6 of the Settings
screen.
Memo
• Make sure the internal machine identification
number (No.) is recorded accurately as these
numbers need to be entered within the Certification
Key Issuing Wizard in order to obtain the
Certification Key.
* The number of pages in the Settings screen may differ depending
on the version.
Note
• The internal machine identification number that
appears beside "No." is different from the machine
serial number (SER. NO.) located on the label
attached to the back of the embroidery machine.
b
Insert the CD-ROM into the computer's CD-
ROM drive.
Memo
• In Windows 7 or Windows Vista, when the AutoPlay
dialog box appears, click Open folder to view files.
Internal
machine
identification
number (No.)
Version
number
3