Accessories; Contents Of Cd-Rom; Installation Overview - Brother Pro PR-1000 Guide D'installation

Accessories

The following items are included with your purchase.
Please verify all contents and if anything is missing or
damaged, contact your authorized dealer.
• CD-ROM (For details regarding contents, refer to
the following.)
• Installation Guide (this guide)
In addition, this kit contains sheets of embroidery
positioning stickers. These are necessary for using the
pattern connecting function. Refer to the Operation
Manual for use.
• Embroidery positioning sticker sheets
Note
• For details on proper use of the included accessory
see the Operation Manual viewable from the disc by
clicking on the "manual" folder and selecting your
preferred language.
You may also view the Operation Manual by clicking
on the "manual_index.pdf" icon contained within the
disc and selecting your preferred language.

Contents of CD-ROM

• Certification Key Issuing Wizard
• Upgrade KIT
* Adobe Reader is required for viewing and printing the
Operation Manual.
• Upgrade application for KIT
Note
• Upgrade application data is contained in the "PR-
1000_PR1000e" folder.
2
All manuals and user guides at all-guides.com
I
Operation Manual (PDF)
I

Installation Overview

First, use the Certification Key Issuing Wizard on the
enclosed CD-ROM to obtain a Certification Key. Then,
use the Certification key within the Settings screen,
page 6, to activate the upgrade application for KIT
the embroidery machine.
In the procedures section,
performed with the embroidery machine and
indicates operations performed with the computer.
[Step 1] Make a note of the internal
machine identification number (No.).
[Step 2] Insert the CD-ROM into the
computer's CD-ROM drive, and then
start the Certification Key Issuing
Wizard.
[Step 3] Follow the wizard instructions
for obtaining the Certification Key.
[Step 4] Install the upgrade application
I
for KIT on the embroidery machine.
[Step 5] Remove the USB media, and
turn the machine off and then on again.
[Step 6] After the upgrade has been
successfully installed, certify the "KIT
in the Settings screen of the embroidery
machine.
I
on
indicates operations
I
"