Harmony Hi Lo Manuel D'assemblage Et D'utilisation page 11

Scenario 2: 2.4" Mid-Leveler will be used
In this scenario, your adjustable height choices are shown in the following table.
Once your height is determined, make the combination of the corresponding Mid-Legs
and Mid-Levelers, shown in the following table.
Securely tighten the Six Support Legs onto your Adjustable Base. Leave no gap between
leg and base.
Securely tighten Two 2.5" Mid-Legs (SL-E) and adjust the 2.4" Mid-levelers (SL-C) to the
same height of the Support Legs.
The illustrations are shown in the following pictures.
Leg Height Combinations
Plastic Cap from the
Standard 5" Support Leg
2.5" Sectional Leg (SL-A)
2.0" Sectional Leg (SL-B)
Plastic Cap from the
Standard 5" Support Leg
2.5" Sectional Leg (SL-A)
Corresponding Mid-Leg Combinations
9
2.4" Mid-Leveler (SL-E)
2.5" Sectional Mid-Leg (SL-C)
2.4" Mid-Leveler (SL-E)