Product Dimensions; Door Swing Dimensions - Jennair INSTAI.L JBSFS42NM Instructions D'installation

PRODUCT DIMENSIONS

SIDE VIEW
The depth from the front of the top grille to the back
of the refrigerator cabinet is 25³⁄
The power cord is 84" (213 cm) long.
The water line attached to the back of the refrigerator
is 5 ft (1.5 m) long.
Height dimensions are shown with leveling legs
extended 1/8" (3 mm) below the rollers.
*83³⁄ "
8
(211.8 cm)
84" (213.4 cm)
Power Cord
*When leveling legs are fully extended to 1¹⁄
(3.2 cm) below rollers, add 1¹⁄
dimensions.
TOP VIEW
Model
42 Rise 41" (104.1 cm)
48 Rise 47" (119.4 cm)
8
" (64.5 cm).
8
25³⁄ "
8
(64.5 cm)
23¹⁄ "
2
(59.7 cm)
*3¹⁄ " (8.9 cm)
2
"
4
" (2.9 cm) to the height
8
A
25³⁄ "
8
(64.5 cm)
B
A B
2 ⁄ " (6.67 cm)
6
8
2 ⁄ " (6.67 cm)
6
8
FRONT VIEW
Width dimensions were measured from trim edge to
trim edge.
Height dimensions are shown with leveling legs
extended 1/8" (3 mm) below the rollers.
(see chart following)
Model
42
48
*When leveling legs are fully extended to 1¹⁄
below rollers, add 1¹⁄ " (2.9 cm) to the height dimensions.
8

DOOR SWING DIMENSIONS

The location must permit both doors to open to a
minimum of 90°. Allow 5" (12.7 cm) minimum space
between the side of the refrigerator and a corner wall.
NOTE: More clearance may be required if you are using
overlay panels, custom handles, or extended handles.
To adjust the door swing, see "Adjust Doors."
*83³⁄ "
8
(211.8 cm)
A
Tipping Radius A
425⁄16" (107.5 cm)
483⁄8" (122.8 cm)
" (3.2 cm)
4