Klarstein BEERKULES Mode D'emploi page 34

EN
34
The max
angle
is not
over 90
degree.
Figure 10
Figure 12
5. Close the lid of the beer cooler. When pouring out the beer, the turn the knob on the
lid to "+" position to release the CO
pouring beer to close the CO
6. Turn on the power switch to "I" position to power on the beer cooler (while
"0"position is to power off it) (see fi gure 13).
CAUTION
Risk of electric shock! Please make sure your hands are dry when you
operate the beer cooler, to avoid electric shock.
Cartridge
holder
Cover
assembly
Figure 11
Note for the controller on the lid:
• Turn off the CO
the beer.
• Turn off the CO
beer fl ow is paused.
• Turn off the CO
changing the CO
• When the beer can not be tapped
out (there is still beer in keg),or beer
foams are not enough, turn the knob
to "+" position for 5 seconds, then
turn off it again.
, and turn it to "-"position when pause or stop
2
. Please refer to the notice label on the lid.
2
Switch is on "off " status
Connect to power supply
Figure 13
CO
2
cartridge
knob when cooling
2
knob when the
2
knob when
2
cartridge.
2