Publicité
Les langues disponibles
Les langues disponibles
EN
30
5. Cooling cavity of beer cooler cannot put into water (as shown in figure 3). Use dry
clothes to clean the water in-and-out cavity surface (as shown in figure 4). Make
sure that there is nothing in the cooling cavity, or it will effect the weight sensor.
Figure 3
How to select a keg
• Sealed 5 L universal keg and 5 L keg with integrated pressure cartridge only.
• Pay close attention to safety and storage messages about the 5 L keg.
• Check 5 L keg is neither damaged nor beer out-of-date before purchasing.
• Protect the top surface from being damaged. Otherwise it could be difficult of
accession for the suction tube.
• Never shake the keg before use.
• Never put the beer keg under the sunlight.
Beer keg sealant
All 5 litre beer keg with the below various appearance sealants can apply to the beer
cooler, however, you should follow the information as below.
The sealants with code No. 20 and 21 can be pierced simply by the cooler piercing pin.
Figure 4
Publicité
