Ezviz T6 Guide Rapide page 9

- Mount the detector to its base to complete the installation.
3
Recording Closed Status
Keep the door or window closed and then press and hold the button on
detector for 2 seconds to record the closed status. The indicator flickers red
for 15 seconds indicating the status is recorded.
The Closed Status will need to be recorded again if the sensor is
removed from its current location.
4
Test the Open/Close Detector
The indicator blinks red when the door or window is opened and will send an
alarm message to the linked EZVIZ account. The indicator blinks blue when
the door or window is closed.
Maintenance
When the battery runs out, a low battery alert will be sent to the EZVIZ account to
notify you to recharge. Remove the detector from its base to recharge it. Reinstall
it after it has been recharged.
4