Ezviz T6 Guide Rapide page 6

Operations
Step 1
Charging
Make sure to charge the Open/Close Detector before you begin using it for the
first time. Connect the sensor to the power socket with the power cable. The
status indicator displays red while it is charging and turns blue when charging is
complete.
A fully-charged battery can last for up to 3 months. Recharge when the
battery runs low.
Step 2
Adding to the Home Sense Alarm Hub
The EZVIZ Home sense alarm hub should be purchased separately.
• Option 1 (Recommended) Add Using the EZVIZ App
1
Remove the Base
Detach the base from the detector by sliding it as directed by the
arrow. You can see the device QR code code located on the back of
the sensor.
1