EUROM Dual-mate 2000 RC Mode D'emploi page 19

1. Press the ON/OFF switch in the ON position
(Figure 9, pos. 2).
2. Press the ON/OFF button on the control
panel (Figure 9, pos. 4) or on the remote
control (Figure 9, pos. 1).
3. The ON/OFF indicator (Figure 9, pos. 3)
switches on.
Fan mode
1. Press the fan speed button on the control panel or remote control until the desired fan
speed is reached:
•
level 1: fan indicator and level 1 indicator light up;
•
level 2: fan indicator and level 2 indicator light up;
•
level 3: fan indicator and level 3 indicator light up;
•
level 4: fan indicator and level 4 indicator light up.
2. The indicator light turns blue.
3. The LED display shows the current temperature.
Heating mode
Heating mode only works at fan speed level 2.
1. Press the heat level button on the control panel or remote control until the desired
heating level is reached:
•
level 1: low heat indicator lights up, P1 appears on the display;
•
level 2: high heat indicator lights up, P2 appears on the display.
2. The indicator light turns red.
3. The LED display shows the current temperature.
Temperature mode
1. Press the heat level button on the control panel or remote control.
2. Use the plus or minus button to set the desired temperature (from 10°C to 35°C).
3. The device automatically adjusts the settings to reach the given temperature.
4. The indicator light turns:
•
red, while in heating mode;
•
blue, when the desired temperature is reached.
5. The LED display shows the current temperature.
Figure 9
19