EUROM Dual-mate 2000 RC Mode D'emploi page 18

1. Place the device on a level and steady
surface.
2. Place the device with a minimum distance of
1 meter to any object, wall or ceiling.
3. Do not place the device directly below a
socket outlet.
4. Make sure the ON/OFF switch is in the OFF
position (Figure 7, pos. 1).
5. Put the power plug into an earthed wall
socket that is easily accessible. Use an
earthed wall socket with a minimum power of
2000 Watt.
Remote control
1. Press on the lip (Figure 8, pos. 2) and remove
the slot (Figure 8).
2. Remove the battery (if present) (Figure 8,
pos. 3).
3. Insert a battery (CR2025) as indicated in the
battery compartment. Make sure to insert
the battery correctly.
4. Replace the cover.
Operation
WARNING
Before every use, make sure that:
•
•
•
CAUTION
When the device is turned on it can give off smoke and an odor. This is normal
and will disappear after a few minutes.
18
you operate the device with dry hands;
the device is clean and dry;
the device is not damaged.
Figure 7
Figure 8