CHIEF iC Serie Instructions D'installation page 17

Installation Instructions
7
1
1
8
1
2
E
1/2" (12.7mm)
A
2
N
P
Q
E
A
N
P
Q
G x4
x8
R x8
INSTALL DISPLAY TO ARM/WALL
PLATE ASSEMBLY
WARNING:
result in serious personal injury or damage to
equipment! It is the installer's responsibility to make
sure the combined weight of all components
attached to the iCLPFA3 does not exceed 150 lbs
(68 kg).
1. Align slots on upper portion of faceplate (E) with
tabs on upper portion of arm assembly (A). Lower
display into place, pivoting threaded stud on
faceplate (E) into slot on arm assembly (A).
2. Install spacer (N), washer (P), and nut (Q) onto
threaded stud. Tighten securely.
1/2" (12.7mm)
2
CABLE MANAGEMENT
CAUTION:
exists for movement of display, and that cables will
not be pinched by installation of covers (G) or screws
(R).
1. Carefully insert cables into cavities located in lower
portions of mount arms.
2. Install each cover (G) with two screws (R).
Exceeding the weight capacity can
Ensure that adequate cable slack
iCLPFA3
17