Publicité
Les langues disponibles
Les langues disponibles
SELECT THE TEMPERATURE SCALE
OPERATING FROM THE REMOTE CONTROL
INSERTING OR REPLACING THE BATTERIES
•
Remove the cover on the rear of the remote control;
•
Insert or replace the batteries with two new LR03 "AAA"
1.5V batteries, inserting them correctly (see the directions
inside the battery compartment) (fig. 7);
•
Replace the cover.
Please note: If the remote control unit is replaced or discarded,
the batteries must be removed and disposed of in accordance
with current legislation as they are harmful to the environment.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries. Do not dispose of batteries in fire.
Batteries may explode or leak. If the remote control is not be
used for a certain length of time, remove the batteries.
USING THE REMOTE CONTROL
•
Point the remote control at the receiver no more than 23
feet (7 meters) away from the appliance (fig. 7) without
obstacles between the remote control and the receiver.
•
The remote control must be handled with care. Do not drop
it or expose it to direct sunlight or sources of heat.
Please note: The remote control can be safely stored in the ap-
propriate compartment (A11).
The temperature can be dis-
played in °C or °F. To change the
temperature unit of measure
touch both the increase
(C3) or decrease
C4) keys for
about 10 seconds.
max
23ft/7 meters
7
DESCRIPTION OF THE REMOTE CONTROL
D1. ON/STAND-BY button
D2. MODE button
D3. Decrease button
D4. Increase button
D5. Air flow selection button
D6. Swing button
D7. Timer button
D1
D6
C17
C15
D3
C8
C10
D5
D7
C14
C16
C3
TURNING THE APPLIANCE ON/OFF
•
Plug into the outlet.
C2
•
Press the
When turned on, the air conditioner starts operating in the
same mode as when it was turned off .
•
To switch the appliance off, press the
Please note: Never switch the appliance off by removing the
plug. Always switch it off by pushing the
a few minutes before removing the plug. Only in this way will
the appliance be able to perform its standard checks.
SELECTING THE OPERATING MODES
To select the desired operating mode, press repeatedly the
MODE button (D6) until the desired function is selected.
Most of the commands available on the remote control corre-
spond to those on the appliance control panel (C).
SELECTING THE TEMPERATURES
In air conditioning mode, press
crease/increase the desired temperature.
SELECTING THE AIR FLOW
In air conditioning and fan modes, press
mote control to increase/decrease the desired air flow.
8
C5
C6
C7
C9
C17
C15
C12
C17
C8
C15
C10
C13
C8
C10
C14
C11
C14
C16
C4
C16
C1
button (D1) to turn the unit on.
C3
C3
C2
C2
(D3) and
D
D2
D4
C5
C6
C5
C7
C6
C9
C7
C9
C12
C12
C13
C13
C11
C11
C4
C4
C1
button (D1) .
C1
button and waiting
(D4) keys to de-
(D5) button on re-
Publicité
