Laney IRT-Studio IRONHEART Mode D'emploi page 3

INTRODUCTION
Forged deep within the Black Country - the metal beating industrial heartland of the
UK - where the sound of metal guitar was born, comes the IRONHEART.
With molten metal flowing through its circuits, IRONHEART continues the legacy
passed on by previous Laney amps such as KLIPP and AOR, and hits you hard between the eyes like a power hammer from hell.
As a member of the IRONHEART family, the IRT-Studio has the same ferocious DNA beneath its hard metal chassis, emitting the
familiar dark red glow that warns of the power ready to be unleashed.
The IRT-Studio has been designed to bring the versatility and power of the IRONHEART family into the studio, capturing the
essence of its bigger brothers, but in a 2U rack-mountable sturdy steel cabinet. Emulated speaker outputs and a low power input
socket allow you to push the 15W output stage to its limits at a more controllable volume level. A USB2.0 socket enables
connection to most recording software and re-amping if required. A dummy load is connected if a loudspeaker is not present,
allowing you to record silently if required.
The IRT-Studio features the same familiar Pre-Boost and pull-shift EQ as the bigger IRT60 and IRT120 models, as well as the
flexible Dynamics and Tone controls that operate on the output section.
Combine your IRT-Studio with an IRT412, IRT212 or IRT112 speaker cabinet for the ultimate tonal experience.
4
3