Publicité
When disconnecting the appliance, grip the plug firmly and do not pull on the cable.
Do not expose the appliance to direct sunlight.
Keep the appliance away from candles, luminaries and open flames, in order to avoid fire risk.
This appliance is only designed to store wines and drinks.
The appliance is heavy. Be careful when moving it.
If your appliance is equipped with castors, remember that these are only designed to facilitate minor
movements. Do not move the appliance over long distances.
Do not lean or climb on the appliance or its elements.
In order to avoid falling objects and to prevent damage to the appliance, do not overload the
compartments of the appliance.
Caution! Cleaning and servicing
Before carrying out servicing, switch off the power supply and disconnect the appliance.
When cleaning the appliance, do not use metal objects, steam systems, volatile fluids, organic solvents
or abrasive substances.
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
To ensure proper electrical connection, follow the recommendations given in the present manual.
Unpack the appliance and visually check that it is not damaged. Do not connect a damaged appliance.
Inform your retailer or point of sale of any damage. In such a case, keep the packaging. It is
recommended that the appliance be allowed to settle for at least 4 hours before connecting the
electrical power supply, so that the compressor fluid feed is correct.
Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation, observe the
installation recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with walls or
with any hot element (compressor, condenser). Observe the installation recommendations.
The appliance should not be placed close to radiators or cooking hot plates or gas rings.
Check that electrical sockets remain accessible when the appliance is installed.
▪
When positioning the appliance, ensure the supply cord is not trapped or damaged.
Power saving
To limit the electricity consumption of your appliance:
▪
Install it in an appropriate place (see "Installing your appliance")
▪
Leave the doors open as little time as possible.
▪
To ensure that the appliance operates properly, clean the condenser regularly (see "Routine
servicing of your appliance").
▪
Regularly inspect the door seals and ensure that they are still closing properly. If this is not the
case, contact your after-sales service.
Trouble shooting
Any electrical work should be carried out by a qualified and skilled technician.
The appliance should be repaired by an accredited repair center, using only manufacturer's original
spare parts.
The appliance is designed for home use only. The manufacturer declines any liability whatsoever
in the case of other use
Publicité
