Pre-Filling Tube Instrcutions - Weston 37-0250-GK Mode D'emploi

PRE-FILLING TUBE INSTRUCTIONS
EXTRA TUBES SOLD SEPARATELY
1. Cover one end of the Tube with plastic
FIGURE 7
wrap. Screw the Front Ring Nut clockwise,
Stomper
until finger tight, onto the Tube (FIGURE 7).
2. With wet hands, form balls of the ground
meat mixture and drop them into the Tube.
Using the Stomper, press the mixture firmly
Tube
into the Tube, squeezing out any trapped
air. Repeat this step until the Tube is filled
up to 1/2" (1.3 cm) from the end of the
Tube.
3. Cover the open end of the Tube with
plastic wrap to store in the refrigerator until
use.
Plastic
4. Remove the plastic wrap on both ends of
Wrap
Front Ring
the Tube prior to use.
Nut
9