Fantec MM-FH36US Mode D'emploi page 9

the normal status.
B. Connect the Player to the PC, plug the adapter into the DC IN port and connect the
device to the PC through USB cable.
C. Once the product enters the working status, the indicator will turn on. The system
green icon appears on the right corner.
D. Right click" my computer", select "management" option and open the window of "hard
disk management".
E. Please select the "hard disk management" option under the directory of "storage" of
console in the right corner. Find a note of "unknown" in the hard disk management
information directory.
F. Right click the area of "unknown" on the hard disk, and click "signature" option.
G. Check the hard disk and click "sure" in the window of "write signature".
H. The "unknown" prompt of hard disk disappears and a "basic" prompt status appears.
Now it is able to start partition and formatting operation.
I. Right click the chart of "unassigned" and select " create hard disk partition" option
J. Enter " creating hard disk partition guide"，and click " next step" to continue
K. Please select the option of " main hard disk partition" in the " select partition type" and
then click " next step" to continue
L. At the " assign the partition capacity"
Please install the value defaulted by the system and then click "next step" to
continue.
M. Keep the value defaulted by the system and assign a driver letter for the hard disk
and then click "next step" to continue.
N. In the formatting partition
Please set the option of " FAT32" or "NTFS" in the option of using file system;
Check the option of "run fast formatting" and then click "next step "to continue.
O. Click "finish" and guide complete
P. The created disk is able to browse in the window of " computer management"
It is able to browse the partition in "my computer" and have reading/writing operation
after finish the partition formatting operation.
EN/8
www.fantec.de