Fantec MM-FH36US Mode D'emploi page 13

composited at the same time. Connect HDMI cable to output of player and with HDMI
input of TV set. Select HDMI mode in TV until it displays the interface of initiation.
Connect to the PC
This HDD & Player is also a personal multimedia file storage device and can be used by
connecting to the PC as a common USB hard drive.
1. Connect to the power supply.
While using the HDD player with PC, power supply is also needed.
2. Connect to PC with USB cable.
Connect the HDD player to PC with USB cable then you can copy and transfer data.
Follow the instruction of the above picture and connect the device to PC.
Power on the PC and enter the system. The PC detects the device automatically and
then the device can be used as an external USB storage device.
After data transfer finished, please remove the USB storage device safely (click the USB
device icon to stop the USB device and then pull out the USB cable).
Notes:
1. Please don't power off when it connect to PC for reading and writing.
2. If there is no USB detected after connected with USB cable, maybe the PC is
operating other program, please pull off the USB cable and wait about 10 seconds
then connect again.
EN/12
www.fantec.de