Fantec MM-FH36US Mode D'emploi page 19

(2) Choose "File" then "save as" from the menu, as the picture on the left hand side
shows, select the picture format as JPEG, input the file name and click the "save" icon.
(3) After click on the "save" icon, a new window will appear as the picture on the right
hand side shows,
(4) Click the "OK" icon.
Q: When the player is powered on, why will the TV have a short flashing, blue screen
or screensaver?
A: This is normal, when the system initializes, it will setup the corresponding
parameters so it can output the correct video signal to the TV, during the initializing time,
the TV will receive incorrect signals or the signals will not be stable and will cause the TV
screen to flash, some TV's will treat this as no signal, and will display a blue screen or
screensaver.
Q: Why is there no sound on movie or music playback when using YPbPr component
output?
A: YPbPr output is a video output only, and does not include sound signals, when
using YPbPr output, please plug the A/V OUT or the S/PDIF jack to output sound.
select "Baseline
EN/18
www.fantec.de
(standard)" or "Baseline optimized".