, Hot water comes out of the coffee spout in
intervals. During the descaling cycle, the machine
stops descaling 3 to 4 times to let the descaling
mixture soak in and to heat up.
Let the machine complete the entire descaling
cycle, which takes 4 to 5 minutes. Do not switch
off the machine during the descaling cycle!
, When all the water in the water reservoir has
been used up, the descaling cycle is finished. The
light ring around the on/off button starts to flash
rapidly.
7
Repeat the descaling procedure (steps 1 to 6)
once. Replace the used pod with another used
pod to filter out the scale residue.
8
Rinse the water reservoir with tap water. Fill
the water reservoir up to the MAX indication
with tap water and repeat steps 3 to 6.
Note: Do not refill the water reservoir with used hot
water or the used descaling mixture.
9
Fill the water reservoir with fresh tap water up
to the MAX indication again and repeat steps
3 to 6 once more.
Note: Always rinse the machine by letting it empty two
full water reservoirs.
10
Remove the used pod and clean the pod
holder after descaling to prevent the sieve in
the centre from getting clogged.
EnglisH
23