VOLTCRAFT SPS-3000/R-N Mode D'emploi page 4

Operation
 EnsurethattheconnectionspecificationsforyourUSBdevicecomplywiththecon-
nection data for the product (see Technical Data).
Do not short-circuit the USB ports.
Always turn off the USB device that you want to connect before connecting it to the
USB port.
Make sure that the device is connected properly, otherwise the product may become
hotorcauseanelectricshockorfire.
• Always turn the USB device off before unplugging it from the power adapter.
• Connect the micro USB connector on the low voltage cable to the micro USB port on your
device.
• Insert the mains plug into a standard household mains socket. The working voltage is
100–240 V/AC.
• The product delivers a current to the connected device via the USB cable.
• Always turn the USB device off before unplugging it from the power adapter.
• Unplug the USB power adapter from the mains socket after use.
Care and Cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Cleantheproductwithadry,fibre-freecloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
Youthusfulfillyourstatutoryobligationsandcontributetotheprotectionoftheenvironment.
Technical Data
Input voltage ........................................100 – 240 V/AC
Input AC frequency ..............................50 – 60 Hz
Output voltage .....................................5.0 V/DC
Output current ......................................3.0 A
Output power .......................................15.0 W
Averageactiveefficiency .....................85.0 %
Efficiencyatlowload(10%) ................80.0 %
No load power consumption ................0.07 W
Modelidentifier:
Commercial registration number:
Manufacturer:
Short circuit protection ...........................2 W
Overload protection ...............................max.3.9A
Cable length ..........................................1 m ±50 mm
Output plug ............................................ F ixedMicro-USBinsequenceD+,
Operating/Storage conditions ................ 0 to+40°C,10–95%relativehumidity
Dimensions(WxHxD) ........................63x46x24mm
Weight ...................................................79.5 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cludingtranslationreserved.Reproductionbyanymethod,e.g.photocopy,microfilming,orthecaptureinelectronicdata
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
SPS-3000/R-N
HRB 3896
Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau
D- shorted
(non-condensing)
-10to+55°C,5–95%relativehumidity
(non-condensing)
*2279964_v2_0920_02_mxs_m_en