VOLTCRAFT SPS-3000/R-N Mode D'emploi page 3

Operating Instructions
SPS-3000/R-N Power adapter for PI3
Item No. 2279964
Intended Use
This product is designed to operate a USB device with a micro USB port, e.g. a Raspberry
3 computer. Power is supplied via a standard household mains socket. The product is protected
against overloads and short circuits.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition,improperusecanresultinshortcircuits,fires,electricshocksorotherhazards.Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Power adapter • Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
 Thesymbolwiththeexclamationmarkinthetriangleisusedtoindicateimportant
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet, as this may result in a fatal electric shock!
This symbol indicates that this product is built according to protection class II. It is
equipped with reinforced or dual insulation between the mains circuit and the output
voltage.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dan-
gerous playing material for children.
•  P rotecttheappliancefromextremetemperatures,directsunlight,strongjolts,high
humidity,moisture,flammablegases,steamandsolvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- hasbeenstoredforextendedperiodsinpoorambientconditionsor
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Never leave the product and the connected device unattended during use.
• Always turn off the connected device before connecting and disconnecting the
product from the mains.
• Unplug the connected USB device from the product when you are not using it.
•  T heproductgeneratesheatduringuse.Ensurethatthereissufficientventilation.
Do not cover the product during use.
• Never short-circuit a USB port.
• The mains socket that the device is plugged into must be easily accessible.
• Only insert the power adapter into a standard mains socket that is connected to
the public grid.
• Before plugging in the power adapter, check whether the voltage stated on the
power adapter complies with the voltage of your electricity supplier.
• Never connect or disconnect the power adapter if your hands are wet.
• Make sure that the cable is not squeezed, bent, damaged by sharp edges or sub-
Pi
®
jected to mechanical stress.
• Always lay the cable so that nobody can trip over or become entangled in it. This
poses a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during
storms.
• Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock! Switch off the mains voltage to the socket to which
the power adapter is connected (switch off at the corresponding circuit breaker or
remove the safety fuse, and then switch off at the corresponding RCD protective
switch). You can then unplug the power adapter from the mains socket. Dispose
of the faulty power adapter in an environmentally friendly manner and discontinue
use. Replace it with a power adapter of the same design.
•  N everpouranyliquidsoverelectricaldevicesorplaceobjectsfilledwithliquidnext
to the product. If liquid or an object does enter the interior of the device, power
down the respective socket (e.g. switch off the circuit breaker), and then remove
the mains plug from the mains socket. Discontinue use and take the product to a
specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated may destroy the product. There is also
a risk of a fatal electric shock! Allow the product to reach room temperature before
connecting it and putting it to use. This may take several hours.
• The mains connection must be near the device.
•  C onsultanexpertwhenindoubtabouttheoperation,safetyorconnectionofthe
appliance.
•  M aintenance,modificationsandrepairsmustonlybecompletedbyatechnicianor
an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected Devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.