Publicité
Les langues disponibles
Les langues disponibles
Operation Instruction
Set
Parameter
Parameter Name
Code
Setting for a master
A01
A02
Refrigerant recycling
A15
Timer setting
Scheduled timers
A16
repetition validity
Set temperature in
A19
auto cooling mode
Set temperature in
A20
auto heating mode
LL
Wi-Fi Connection
The wired controller will perform self-tests on startup to check whether the Wi-Fi feature is
provided.
1. If the Wi-Fi feature is provided, the "
The wired controller displays " " and flashes when there is no connection with a server.
When connected to a server, the wired controller will display an icon according to the
connection signal strength with the server. When the wired controller cannot detect a Wi-
Fi module or when the Wi-Fi module is faulty, the Wi-Fi icon will not be displayed and the
temperature display area will show the fault code "A4" for 1 second every 10 seconds.
When any button is pressed, the fault code "A4" is hidden and the wired controller
displays as normal. When the wired controller is inactive for 5 minutes, the fault code
"A4" is displayed again as mentioned above.
Button operations
To reselect a hotspot and server, proceed as follows:
Press and hold the "
network.
2.If the Wi-Fi feature is not provided, the Wi-Fi icon and fault code are not displayed.
Parameter Range
00: do not change
settings
indoor unit
01: enabled
00: invalid
01: valid
00: countdown timer
01: scheduled timer
00: repetition invalid
01: repetition valid
17°C to 31°C
16°C to 30°C
00: not testing
Test
01: testing
" button for 5 seconds to enter the STA mode to reconfigure the
and Meaning
1.When set to 00, the current
" icon will display, and the following applies:
16
Description
master and slave states are not
changed;
When set to 01, the current indoor
unit will be changed to the master.
When set to 01, the wired
controller issues the after-sales
refrigerant recycling instructions.
Publicité
