GIA giatsu XKRB1 Manuel De L'utilisateur page 36

Operation Instruction
DRY Setting
Dry function: After the unit is turned off, the air conditioner runs automatically to blow-dry the
water in the evaporator in the indoor unit to avoid the build-up of mildew.
In cooling or dry mode, press the "
flashes. Press the "
Note:
● The dry function is unavailable in auto/fan/heating mode.
● The dry function can be cancelled when powered off.
FRESH-AIR
In cooling/dry mode.
QUIET Setting
Press the " " button to switch to the quiet function. The "
" " button to turn the function on/off.
Note:
● Quiet mode exits automatically when switching modes and adjusting the fan speed.
● Powering off and then on will turn off the quiet function.
● "Turbo" and "Quiet" cannot be enabled at the same time.
" button to switch to the dry function. The "
" button to turn this function on/off.
Press the "
switch to the dry.
" button to
12
Press the " " button to
turn the dry.
" icon will flash. Press the
" icon