GIA giatsu XKRB1 Manuel De L'utilisateur page 35

Operation Instruction
E-HEATER Setting
The E-Heater function can be turned on under the heating mode to improve the heating effect.
In dry mode, the E-Heater function can be turned on to prevent under-heated air from flowing
out, which will reduce the room temperature.
Press the " " button to switch to the E-Heater function. The "
Press the " " button to turn this function on/off.
Note: The E-Heater function is turned on by default in heating mode.
FRESH-AIR
In heating/dry mode.
Sleep Setting
In Cooling/Heating/Dry mode, press the "
" " icon will flash, then press the "
FRESH-AIR
In cooling/heating/dry mode.
FRESH-AIR
Press the " " button to
switch to the E-Heater function.
" button to switch to the Sleep function, the
" button to turn the function on /off.
FRESH-AIR
Press the " " button to
function.
switch to the Sleep
11
" icon will then flash.
FRESH-AIR
Press the " " button to
turn the E-Heater function
on/off.
FRESH-AIR
Press the " " button to turn
the Sleep function on/off.