Gumotex SEAWAVE Manuel D'utilisateur page 6

SEAWAVE / RUSH 2 boat rudder
GB
User's Guide
Dear customer,
this manual is intended to familiarize you with the
installation and use of the rudder, which can be pur-
chased as an accessory for the inflatable boat. It con-
tains a detailed description of the whole rudder system
and information about its operation and maintenance.
Please read this User's Guide carefully before using
the rudder. If you have any trouble installing or using
the rudder, contact your dealer.
Please keep this manual in a safe place and give it to
the new owner if you sell the boat with the rudder.
1. TECHNICAL DESCRIPTION
1 Rudder
2 Threaded lug with nut
3 Lifting cable
4 Snap hook
5 Pedal
6 Control cable
7 Allen screw M6
8 Metal pedal bracket
9 Velcro strap
10 Bracket (+ base with hexagon)
11 Washer
12 Screw
13 Pin with circlip
14 Brake
2. INSTRUCTIONS FOR INSTALLING THE RUDDER
Assembling the rudder, Fig. No. 1
After removing the rudder (1) from the box, insert the
supplied threaded lugs (2) in the outer holes and se-
cure with nut M5 (you can use the hole for the rudder
brackets). Slide the snap hooks (4) in the threaded lugs
(2) and at the end of the lifting cable (3).
Installing the pedal bracket in the kayak, Fig. No. 2
Instructions for assembling and installing the metal
pedal bracket are included separately.
6
Index
1. Technical description
2. Instructions for installing the rudder
3. Operating the rudder
4. Disassembly of the rudder
5. Maintenance and storage
6. Warranty conditions
7. Disposal of the product
8. Disposal of the packaging
1
1
2
14
2
5
6
7 13
Version 9/2021
3 10 11 12
4 6
8