Pro-User NFC1800 Mode D'emploi page 2

ENGLISH
INTRODUCTION
This Pro-User Intelligent Battery Charger is part of the family of advanced battery chargers
manufactured by Pro User International Ltd. Pro-User chargers will increase your battery's
performance and prolong its life.
We have taken numerous measures in quality control to ensure that your product arrives
in top condition, and will perform to your satisfaction.
Please carefully read and follow the safety and operating instructions. Not
following these instructions may result in a serious accident, including damaged
property or serious injuries.
IMPORTANT SAFETY INSTRUCTIONS
General
Before using the device, study the instruction sheet. Always disconnect the mains supply
before making or breaking the DC connections.
Gases
When the battery is being charged you may notice bubbling in the fluid caused by the
release of gas. As the gas is flammable, avoid naked flames, glowing or electro statically
charged matter and sparks nearby the battery. Provide adequate ventilation.
Because of this risk of explosive gas, only connect and disconnect the battery leads when
the mains supply is disconnected.
Type of batteries
This charger is suitable for 6, 12 and 24V lead acid batteries only and should not be used
to recharge any other type of battery.
Points of note
• Protect the charger against rain, damp and heat. Do not cover the ventilation holes.
When not in use, store the charger in a dry area to avoid moisture
• Do not charge faulty batteries.
• Attend to instructions of the battery manufacturer and the vehicle manufacturer
concerning battery charging.
Repair
• There are no user-serviceable parts inside the device. Any attempt at modification or
repair by the user will entail the loss of your guarantee.
• The mains supply cord of this device can only be repaired at specialized workshops; do
not use the charger if one of the cords has been damaged.
2