Kenwood FP120 Serie Instructions page 7

slicing plate
If necessary cut food to fit the feed tube. Core
foods such as apples and peppers. Pack the food
in an upright position in the feed tube. The height
should be slightly shorter than the feed tube.
Using the pusher, push down with an even
pressure whilst the machine is running.
hints
l
Use fresh ingredients.
l
Don't cut food up too small. Fill the feed tube fairly
full, this prevents food from slipping sideways
during processing.
l
When slicing or shredding: food placed upright
comes out shorter than food placed horizontally.
l
After using a cutting plate there will always be a
small amount of waste on the plate or in the food.
l
Do not allow food to build up to the underside of
the plate - empty regularly.
l
Push food down the feed tube using an even
pressure.
maxi blend canopy
When blending, use the maxi blend canopy in
conjunction with the knife blade. It allows you to
increase the liquid processing capacity of the bowl
and improve the chopping performance of the
blade.
1 Place the canopy into the bowl over the knife
blade - do not push down
2 Fit the lid .
citrus press
The citrus press is used to juice citrus fruit ie
oranges, lemons, limes and grapefruits.
1 Fit the bowl onto the processor. Add the strainer
and turn clockwise until the fin on the strainer
aligns with the mark on the processor body
2 Attach the cone onto the drive shaft turning until it
drops all the way down
3 Cut the fruit in half. Switch on and press the fruit
onto the cone.
care & cleaning
l
Always switch off and unplug before cleaning.
l
Handle blades and cutting plates with care - they
are extremely sharp.
l
Some foods may discolour the plastic. This is
perfectly normal and won't harm the plastic or
affect the flavour of your food. Rub with a cloth
dipped in vegetable oil to remove the
discolouration.
.
.
.
power unit
l
Wipe with a damp cloth, then dry. Ensure that the
interlock area is clear of food debris.
l
Don't immerse the power unit in water.
l
Wrap excess cord around the bracket at the back
of the appliance.
all other parts
l
Wash by hand, then dry.
l
Alternatively they can be washed on the top rack
of your dishwasher. A short low temperature
programme is recommended.
service & customer care
l
If the cord is damaged it must, for safety reasons,
be replaced by KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
l
using your appliance or
l
servicing, spare parts or repairs
l
Contact the shop where you purchased your
appliance.
l
Designed and engineered by Kenwood in the UK.
l
Made in China.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH THE EUROPEAN
DIRECTIVE ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT (WEEE)
At the end of its working life, the product must not
be disposed of as urban waste.
It must be taken to a special local authority
differentiated waste collection centre or to a dealer
providing this service.
Disposing of a household appliance separately
avoids possible negative consequences for the
environment and health deriving from inappropriate
disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of
household appliances separately, the product is
marked with a crossed-out wheeled dustbin.
5