Publicité
Les langues disponibles
Les langues disponibles
The MKA-16-03 Electric Steer Quick Release Bracket is designed to work on a number of Minn Kota trolling motors. The
base extrusion or mounting bracket of the trolling motors may vary. Please note the appearance of the applicable trolling
motors and mounting brackets.
Inboard
PowerDrive
INSTALLATION
1
a. Make sure that the Power Cables from the
battery are disconnected, or that the breaker,
if equipped, is "off".
WARNING
Make sure the motor is mounted on a level surface and is
not connected to a power source.
2
b. Place the mount on an elevated, level surface
such as a workbench or the tailgate of a pickup.
The motor should be in the stowed position.
c. Remove the four sideplate screws using a #3
Phillips screwdriver. Two of these screws will be
located on each side of the mount.
Deployed
©2018 Johnson Outdoors Marine Electronics, Inc.
Inboard
Ulterra
Stowed
Inboard
Terrova
Power Cables
2c
NOTE:
recommend having a second person help with the
installation. If mounting to a Pontoon Hand Control
Bracket or Deckhand 40, directions specific to motor
installation do not apply.
Inboard
PowerDrive Pontoon
Hand Control Bracket
Sideplate Screw
A motor may weigh up to 65lbs. We
Inboard
DeckHand 40
minnkotamotors.com | 2
Publicité
