Fluke EDDYTHERM 2x Mode D'emploi page 37

11. Spare parts
Part number
ETH 16.355
ETH 16.340
ETH 16.328
ETH 16.320
ETH 16.314
ETH 16.310
ETH 16.301
ETH 16.302
ETH 16.303
ETH 15.330
ETH 15.340
12. Disposal
Any waste electrical and electronics parts of EDDYTHERM 2x must be
disposed of according to applicable safety and environmental regulations.
Customers in member states of the European Union must adhere to the
EU directive 2002/96/EC on waste electrical and electronic equipment
(WEEE). PRÜFTECHNIK products that fall under this directive are marked
with the shown crossed-out wheeled bin symbol and must be disposed of
according to this directive.
The marked components must be disposed of with PRÜFTECHNIK or

their authorized disposal partners.
Such parts must be taken to the nearest collection facility.

If you have any questions regarding the WEEE Directive, please

contact your local PRÜFTECHNIK sales representative.
Description
55 x 55 x 275 mm (2 11/64" x 2 11/64" x 10 51/64") EDDYTHERM 2x yoke
[for bores with minimum Ø of 80 mm / 3 5/32" ]
40 x 40 x 275 mm (1 9/16" x 1 9/16" x 10 51/64") EDDYTHERM 2x yoke
[for bores with minimum Ø of 60 mm / 2 23/64" ]
28 x 28 x 275 mm (1 7/64" x 1 7/64" x 10 51/64") EDDYTHERM 2x yoke
[for bores with minimum Ø of 40 mm / 1 9/16" ]
20 x 20 x 275 mm ( " x
51/64
bores with minimum Ø of 30 mm / 1
14 x 14 x 275 mm ( " x
35/64
bores with minimum Ø of 20 mm /
10 x 10 x 275 mm ( " x
25/64
bores with minimum Ø of 15 mm /
55 x 55 x 100 mm (2 11/64" x 2 11/64 x 3 15/16") EDDYTHERM 2x set
support yoke
EDDYTHERM 2x swivel arm
EDDYTHERM 2x yoke adapter
EDDYTHERM protective gloves
EDDYTHERM K-type temperature probe
" x 10 ") EDDYTHERM 2x yoke [for
51/64 51/64
" ]
11/64
" x 10 ") EDDYTHERM 2x yoke [for
35/64 51/64
" ]
51/64
" x 10 ") EDDYTHERM 2x yoke [for
25/64 51/64
" ]
19/32
17