Hints And Tips - ARTHUR MARTIN ASF5206LOW Notice D'utilisation

12
3. Turn the knob until the programme
marker is aligned with the programme
you want to set.
• On/off indicator comes on.
• Start indicator starts to flash.
4. Press Départ.
• The programme starts and the
indicator of the washing phase is
on.
• On/off indicator and start indicator
are on.
Starting a programme with
delay start
1. Set the programme.
2. Press Départ Différé to delay the start
of the programme of 3 hours.
The delay indicator comes on.
3. Press Départ.
Start indicator comes on.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for more
than 30 seconds during the
drying phase, the running
programme ends. It does not
happen if the door is opened by
AirDry function.

HINTS AND TIPS

General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the environment.
• Remove larger residues of food from
the dishes into the waste bin.
• Do not pre-rinse dishes by hand. When
needed, use the prewash programme
Do not try to close the
appliance door within 2 minutes
after AirDry automatically
opens it, as this may cause
damage to the appliance.
If, afterwards, the door is
closed for another 3 minutes,
the running programme ends.
Cancelling the delay start while
the countdown operates
1. Press and hold Départ and Départ
Différé until the start indicator starts to
flash.
2. Press Départ to start the programme.
Cancelling the programme
Press and hold Départ and Départ
Différé until the start indicator starts to
flash.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
End of the programme
When the programme is completed the
indicator is on. After 5 minutes of non-
use, the appliance enters standby mode
and all the indicators are off. It decreases
energy consumption.
1. To deactivate the appliance, turn the
programme knob until the programme
marker is in on/off position.
2. Close the water tap.
(if available) or select a programme
with a prewash phase.
• Always use the whole space of the
baskets.
• When loading the appliance, make sure
that the dishes can be completely
reached and washed by the water
released from the spray arm nozzles.