Klarstein 10032787 Mode D'emploi page 17

Free-standing installation
1. Put the product upside down on a soft cotton cloth or carpet.
2. Mount the stand in the corresponding location of the lower part of the product as shown above, and then
fix the randomly supplied screw at the bottom of the product with a screwdriver and tighten the screw..
Wall mount
1. Take out 4 brackets, 6 expansion screws and 6 screws out from the box, and fix 2 brackets onto the wall ac-
cording to the distances between holes of the bracket, as depicted in the picture below.
Installation
17