Publicité
Les langues disponibles
Les langues disponibles
R
Fitting the Chimney
•
15) Place the Top chim ney w ith the slots facing upwards
when installing the recircul ation version, or vice versa with the
slots facing downwards when in stalling the ducting vers ion.
Each chimney stack consists of two sections. Fit the upper
16)
sections item 7a & b, first by expanding the chimneys
slightly to allow them to clamp around the bracket item D and
secure the chimney stacks to the brackets using the two M4
screws item 12c provided. Fit the lower chimney sections by
expanding the chimneys slightly to allow them from the top of
the canopy to clamp around the upper chimney sections.
EN
Ducting in the recirculation mode
•
12) Fit the recirculation spigot R onto the
chimney bracket.
13) Connect the ducting 150mm (6 INS)
not provided between motors item 6
and the recirculation spigot and secure
the connections with appropriate clamping
rings or adhesive tape (Fig. 6).
14) Insert the charcoal filter into the base of
the motor housing and secure the filter with
two securing straps A as illustrated Fig. 6.
A
Fig. 6
D
7a
7b
7
Publicité
